It is important to know how electrical appliances and systems are in your homework so you know what to do if something does not work as expected. Diverter valves may sound complicated, but understanding their purpose is easy. Below, you will find some basic information about what a diverter valve is why it is important. And how it works.

What Is A Diverter Valve?

If you are not sure what a diverter valve is, consider it an essential part of your home’s water system. The easy way to describe the functionality of a diverter valve is by using an easy example – in a show/tub combo, when you turn the knob on your shower tap to redirect water from the tub spout to the showerhead; you have used a shower diverter valve. A simple pull of a handle or pin will connect a rubber stopper that will alter the direction of the water flow. This action creates pressure that forces the water up from the tub tap toward the showerhead, allowing you to enjoy a hot shower in your bathtub.

If you are speculating, “How does a diverter valve work,” the answer is simple. The valve’s job is to do accurately what its name says: to divert the water flow from one place to another. Although it is a useful piece of plumbing hardware that rapidly changes the water direction. A diverter valve has other uses, too. These valves open & close pathways, allowing hot water to travel not only to domestic hot water systems such as showers and taps but also to radiators.

It is important to note that the mixing valve is not the same as a diverter valve. When it comes to diverter vs. mixer valves, the main difference among them is that you’ll need to install a mixer valve. Only if you desire to change the outlet from which the water is coming.

Different Types of Diverter Valves

When it comes to shower diverter valves, there are three dissimilar types: the tee diverter, two-valve diverter, and three-valve diverter.

  • A tee diverter is a simple straight-pull handle that directs water to the shower. You can stop the water from running by pushing the tee back down after you are finished using the shower.
  • A two-valve diverter is integral using two L-shaped valves found in the center of a standard tap. A two-valve diverter regulates the water temperature with a single dial found in the center of the two temperature taps.
  • A three-valve diverter is fitted on two-tap faucets. When hot and cold water taps are turned on and the water mixes to the preferred temperature. Also water flows out of the third faucet, a showerhead for instance, by turning the diverter. You can turn it off by turning it counter-clockwise to go back to its original position.

Diverter Valve Maintenance and Repair

Reduce wear and strain on your shower diverter to stop any require for repairs. Maintenance is key. Always ensure that you release the diverter. Therefore it will let the water flow from the tub faucet for numerous seconds before you fully turn off the water.

If you are wondering how to adjust a diverter valve or fix a broken one, the solution is usually as simple as tapering some screws behind the valve’s faceplate.

Capitalizing on our in-depth industry experience, SAKSAHM is engaging in supplying, importing, distributing, exporting, and wholesaling of better quality Diverter Valve. We use these Diverter Valves in many industries in diverting the flow of the substance from one way to another direction which is efficient and accurate in functioning.

Recent Comments