Gravity Diverter Valves are planned to divert the gravity flow of bulk solids from one feeding point to two or more receiving points. Bulk material in powdered, pellet, flake, or granular form falls freely through the Gravity Diverter Valves. Wear resistant swivel flap is used for diverting the flow inside the valve.
Depending on the application it consists of a flexible polyurethane rubber that is sandwiched among two metal plates for better sealing. Flap-type diverter valves are installed on outlets of dry bulk storage silos, bins, chutes, conveyors & similar equipment.
Design Features & Benefits of Gravity Diverter Valves
Heavy duty construction flap valve make sure long years of reliable operation flat blade diverter valve can be actuated whereas the material is being conveyed rectangular & circular inlet / outlet flanges are available DIN or ANSI flanges are available built-in replaceable polyurethane as well as silicone seals to prevent product leakage cast steel, cast aluminum & welded steel construction diverter valve designs available depending on application necessities. Stainless steel diverter valve models are available for good and sanitary applications Hardoxstell models exist for abrasive bulk solids.
High-temperature gravity valve models up to 200C can be operated by a pneumatic actuator, pneumatic piston, electrical drive, or manual handle. The diverter flap position can be adjusted with a special position controller for proportioning the product flow to two outlets. Built-in limit switches & position indicators to check the valve position. Optional side inspection door. Custom designed 2 way outlet as well as 3 way outlet diverter valve models and available.
What are the Key features of Gravity Diverter Valves
- Inlet multiple-outlet and vice-versa macawber linear type diverter valve
- Used for manifold pipe diversion/conversion applications
- Should be preferably mounted in a vertical orientation
- Actuation can be pneumatic, hydraulic and motorized
- Can be used for all types of pneumatic conveying – dense phase as well as lean phase systems
- Can be driven by rack as well as pinion or a chain drive
- Suited for most powders, pellets, granules and flakes
- Diverting pipe shall move in a linear way the length of a single line
- Uses the inflatable sealing design technology in the inlet and the outlet nozzles designed for sizes from 2” to 12” in the bore
What are the Specification of Gravity Diverter Valves
#1: Bodies
Fabricated Mild Steel or Stainless Steel
#2: Flap Valves & Spindles
Mild Steel or Stainless
#3: Wiper Seal
Polyurethane or Food-Quality Rubber
#4: Actuation
Air Cylinder, Electric Linear Actuator, or Manual
#5: Pneumatic Version
Complete With Five-Port Four-Way Single Coil Solenoid Valves
#6: Limit Switches
Available To Indicate Open/Closed Conditions. Pneumatics & Switches Are Housed In Guards.
#7: Connections
Square Flanges, Round Flanges or Spigots
With our huge market proficiency and know-how in this domain, SAKSHAM is considered amongst one of the leading entities betrothed in providing a vast array of Gravity Diverter Valves. We are one of the renowned Gravity Diverter Valves Manufacturers. Manufactured under the direction of talented employees, premium quality basic material and advanced tools & machinery are used.
Recent Comments